10
Yes
None
1
1000000
Name...
/products-services/
Thumbnail
Sort By:

Categories:

10/4 Feed and Expansion Tank
10/4 Feed and Expansion Tank Image

Length:
Width:
Height:
Capacity:

100 Gal Coffin Water Tank
100 Gal Coffin Water Tank Image

Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. Every closed water tank comes with lids fitted and a float valve backing plate for easy installation of the float valve and overflow fitting.

Each product is visually inspected for defects using a light source and again prior to loading.

Installation Instructions:

  1. Inspect all tanks before installation as damage may occur during transport
  2. Ensure that the tank is fully supported
  3. Use a hole saw to drill holes in the tank
  4. The centre of the float valve should be 38mm from the top of the tank
  5. Do not install the tank close to a heat source such as a light or heater

Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.

As Standard

  • Polytank Lids
  • Float Valve Backing Plate

Options

  • Drip Tray
100/70 Water Tank
100/70 Water Tank Image

Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.

Each product is visually inspected for defects using a light source and again prior to loading.

Installation Instructions:

  1. Inspect all tanks before installation as damage may occur during transport
  2. Ensure that the tank is fully supported
  3. Use a hole saw to drill holes in the tank
  4. The centre of the float valve should be 38mm from the top of the tank
  5. Do not install the tank close to a heat source such as a light or heater

Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.

 

Options

  • Lid
  • Drip Tray
1000 Litre Rectangular Oil Tank
1000 Litre Rectangular Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

All single skin oil storage tanks are manufactured to European Standard EN13343 and the manufacturing process adheres to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention

 

1150 Litre Potable Water Tank
1150 Litre Potable Water Tank Image

Platinum Tanks range of large capacity potable water tanks are suitable for domestic, commercial and agricultural use. The entire range is manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. Every single skin water tank is fitted with a standard 1” BSP outlet for ease of installation, a 1/2” float valve and a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

The manufacturing process adheres to the ISO 9001:2015 quality standard and all single skin water storage tanks are visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full the tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung
  • 1/2” Float Valve

Options

  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • 2” Fill Point
1150 Litre Rectangular Oil Tank
1150 Litre Rectangular Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

All single skin oil storage tanks are manufactured to European Standard EN13343 and the manufacturing process adheres to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention
12 Gallon Livestock Drinker
12 Gallon Livestock Drinker Image
  • Manufactured from medium/high density polyethylene.
  • Robust construction by design.
  • UV stabilised and suitable for all weather conditions.
  • All Platunum Drinkers come complete with 1/2 inch high pressure ball valves as standard. The design of the ball housing helps ensure the animals cannot damage the ball valve. They can also be fitted with larger ball valves on request.
  • Drinkers are maintenance free.
  • The livestock drinkers are very durable and lightweight thus making moving from pasture to pasture easy.
  • 54 Litres / 12 Gallons.
  • All drinkers need to be handled with care.

 

1230 Litre Low Profile Oil Tank
1230 Litre Low Profile Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

All single skin oil storage tanks are manufactured to European Standard EN13343 and the manufacturing process adheres to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention
1250 Litre Rectangular Oil Tank
1250 Litre Rectangular Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

All single skin oil storage tanks are manufactured to European Standard EN13343 and the manufacturing process adheres to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention
1360 Litre AdBlue Tank
1360 Litre Fuel Bank
1360 Litre Fuel Bank Image

Platinum Tanks range of bunded fuel stations feature a piusi fuel pump fitted with a 10 micron particulate filter and a 4m hose with automatic shut-off nozzle.

Both the inner tank and bund outer are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 2” fill point is fitted to the inner tank to enable easy filling of the inner tank. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

Platinum Tanks bunded fuel stations are manufactured to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • Piusi Pump
  • 4m Hose Pack with Auto Shut-Off Nozzle
  • Gauge Bung

 

Options

  • Alternative Hose Lengths
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention
1360 Litre Horizontal Oil Tank
1360 Litre Horizontal Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

All single skin oil storage tanks are manufactured to European Standard EN13343 and the manufacturing process adheres to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention
1360 Litre Vertical Oil Tank
1360 Litre Vertical Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

All single skin oil storage tanks are manufactured to European Standard EN13343 and the manufacturing process adheres to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention

 

Diameter: 1,200mm 47.24″

1360 Litre Vertical Waste Oil Well
150/100 Water Tank
150/100 Water Tank Image

Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.

Each product is visually inspected for defects using a light source and again prior to loading.

Installation Instructions:

  1. Inspect all tanks before installation as damage may occur during transport
  2. Ensure that the tank is fully supported
  3. Use a hole saw to drill holes in the tank
  4. The centre of the float valve should be 38mm from the top of the tank
  5. Do not install the tank close to a heat source such as a light or heater

Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.

 

Options

  • Lid
  • Drip Tray
150kg Coal Bunker
150kg Coal Bunker Image

Platinum Tanks range of bunkers offer customers a sturdy solutions for all their solid fuel and domestic storage needs. Available in black and green, all bunkers are manufactured from UV stabilised medium density polyethylene to protect the product from UV degradation. The manufacturing process adheres to the ISO 9001:2015 quality standard.

Features

  • Available in Black and Green.
  • These bunkers are designed for strength.
  • Indoor and outdoor use.
  • They have a top and bottom opening for easy access.
  • They are manufactured from UV resistant medium density polyethylene.
  • No maintenance required as they will not rot or rust.
150kg Grit Bin
150kg Grit Bin Image

The Platinum Tanks grit bin range offers customers storage solutions for sand and salt.

  • Available in highly visible colours e.g. Yellow
  • These bunkers are designed for strength.
  • Indoor and outdoor use.
  • They have a top and bottom opening for easy access.
  • They are manufactured from UV resistant medium density polyethylene.
  • No maintenance required as they will not rot or rust.

 

2000 Litre Horizontal Oil Tank
2000 Litre Horizontal Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

All single skin oil storage tanks are manufactured to European Standard EN13343 and the manufacturing process adheres to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention
230 Gallon Craneable Mortar Tub
230 Gallon Craneable Mortar Tub Image

Handles: 2 Handle Craneable

230 Gallon Teleporter Mortar Tub
230 Gallon Teleporter Mortar Tub Image

Handles: 4 Handle Teleporter

Capacity:

25 Gal Coffin Water Tank
25 Gal Coffin Water Tank Image

Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. Every closed water tank comes with lids fitted and a float valve backing plate for easy installation of the float valve and overflow fitting.

Each product is visually inspected for defects using a light source and again prior to loading.

Installation Instructions:

  1. Inspect all tanks before installation as damage may occur during transport
  2. Ensure that the tank is fully supported
  3. Use a hole saw to drill holes in the tank
  4. The centre of the float valve should be 38mm from the top of the tank
  5. Do not install the tank close to a heat source such as a light or heater

Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.

As Standard

  • Polytank Lids
  • Float Valve Backing Plate

Options

  • Drip Tray

Length:
Width:
Height:
Capacity:

25 Gal Standard Closed Water Tank
25 Gal Standard Closed Water Tank Image

Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. Every closed water tank comes with lids fitted and a float valve backing plate for easy installation of the float valve and overflow fitting.

Each product is visually inspected for defects using a light source and again prior to loading.

Installation Instructions:

  1. Inspect all tanks before installation as damage may occur during transport
  2. Ensure that the tank is fully supported
  3. Use a hole saw to drill holes in the tank
  4. The centre of the float valve should be 38mm from the top of the tank
  5. Do not install the tank close to a heat source such as a light or heater

Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.

As Standard

  • Polytank Lids
  • Float Valve Backing Plate

Options

  • Drip Tray
250 Gallon Livestock Drinker
250 Gallon Livestock Drinker Image
  • Manufactured from medium/high density polyethylene.
  • Robust construction by design.
  • UV stabilised and suitable for all weather conditions.
  • All Platunum Drinkers come complete with 1/2 inch high pressure ball valves as standard. The design of the ball housing helps ensure the animals cannot damage the ball valve. They can also be fitted with larger ball valves on request.
  • Drinkers are maintenance free.
  • The livestock drinkers are very durable and lightweight thus making moving from pasture to pasture easy.
  • 1135 Litres / 250 Gallons.
  • All drinkers need to be handled with care.

Diameter: 1,725mm

 

2500 Litre AdBlue Tank
2500 Litre Fuel Bank
2500 Litre Fuel Bank Image

Platinum Tanks range of bunded fuel stations feature a piusi fuel pump fitted with a 10 micron particulate filter and a 4m hose with automatic shut-off nozzle.

Both the inner tank and bund outer are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 2” fill point is fitted to the inner tank to enable easy filling of the inner tank. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

Platinum Tanks bunded fuel stations are manufactured to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • Piusi Pump
  • 4m Hose Pack with Auto Shut-Off Nozzle
  • Gauge Bung

 

Options

  • Alternative Hose Lengths
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention
2500 Litre Horizontal Oil Tank
2500 Litre Horizontal Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

All single skin oil storage tanks are manufactured to European Standard EN13343 and the manufacturing process adheres to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention
2500 Litre Vertical Oil Tank
2500 Litre Vertical Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

All single skin oil storage tanks are manufactured to European Standard EN13343 and the manufacturing process adheres to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention

 

Diameter: 1,650mm 64.96″

30/20 Water Tank
30/20 Water Tank Image

Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.

Each product is visually inspected for defects using a light source and again prior to loading.

Installation Instructions:

  1. Inspect all tanks before installation as damage may occur during transport
  2. Ensure that the tank is fully supported
  3. Use a hole saw to drill holes in the tank
  4. The centre of the float valve should be 38mm from the top of the tank
  5. Do not install the tank close to a heat source such as a light or heater

Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.

 

Options

  • Lid
  • Drip Tray
300kg Coal Bunker
300kg Coal Bunker Image

Platinum Tanks range of bunkers offer customers a sturdy solutions for all their solid fuel and domestic storage needs. Available in black and green, all bunkers are manufactured from UV stabilised medium density polyethylene to protect the product from UV degradation. The manufacturing process adheres to the ISO 9001:2015 quality standard.

Features

  • Available in Black and Green.
  • These bunkers are designed for strength.
  • Indoor and outdoor use.
  • They have a top and bottom opening for easy access.
  • They are manufactured from UV resistant medium density polyethylene.
  • No maintenance required as they will not rot or rust.
300kg Grit Bin
300kg Grit Bin Image

The Platinum Tanks grit bin range offers customers storage solutions for sand and salt.

  • Available in highly visible colours e.g. Yellow
  • These bunkers are designed for strength.
  • Indoor and outdoor use.
  • They have a top and bottom opening for easy access.
  • They are manufactured from UV resistant medium density polyethylene.
  • No maintenance required as they will not rot or rust.

The Platinum Tanks grit bin range offers customers storage solutions for sand and salt.

  • Available in highly visible colours e.g. Yellow
  • These bunkers are designed for strength.
  • Indoor and outdoor use.
  • They have a top and bottom opening for easy access.
  • They are manufactured from UV resistant medium density polyethylene.
  • No maintenance required as they will not rot or rust.
40 Gallon Livestock Drinker
40 Gallon Livestock Drinker Image
  • Manufactured from medium/high density polyethylene.
  • Robust construction by design.
  • UV stabilised and suitable for all weather conditions.
  • All Platunum Drinkers come complete with 1/2 inch high pressure ball valves as standard. The design of the ball housing helps ensure the animals cannot damage the ball valve. They can also be fitted with larger ball valves on request.
  • Drinkers are maintenance free.
  • The livestock drinkers are very durable and lightweight thus making moving from pasture to pasture easy.
  • 180 Litres / 40 Gallons.
  • All drinkers need to be handled with care.

 

42 Gal Standard Closed Water Tank
42 Gal Standard Closed Water Tank Image

Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. Every closed water tank comes with lids fitted and a float valve backing plate for easy installation of the float valve and overflow fitting.

Each product is visually inspected for defects using a light source and again prior to loading.

Installation Instructions:

  1. Inspect all tanks before installation as damage may occur during transport
  2. Ensure that the tank is fully supported
  3. Use a hole saw to drill holes in the tank
  4. The centre of the float valve should be 38mm from the top of the tank
  5. Do not install the tank close to a heat source such as a light or heater

Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.

As Standard

  • Polytank Lids
  • Float Valve Backing Plate

Options

  • Drip Tray
45/30 Water Tank
45/30 Water Tank Image

Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.

Each product is visually inspected for defects using a light source and again prior to loading.

Installation Instructions:

  1. Inspect all tanks before installation as damage may occur during transport
  2. Ensure that the tank is fully supported
  3. Use a hole saw to drill holes in the tank
  4. The centre of the float valve should be 38mm from the top of the tank
  5. Do not install the tank close to a heat source such as a light or heater

Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.

 

Options

  • Lid
  • Drip Tray
50 Gal Coffin Water Tank
50 Gal Coffin Water Tank Image

Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. Every closed water tank comes with lids fitted and a float valve backing plate for easy installation of the float valve and overflow fitting.

Each product is visually inspected for defects using a light source and again prior to loading.

Installation Instructions:

  1. Inspect all tanks before installation as damage may occur during transport
  2. Ensure that the tank is fully supported
  3. Use a hole saw to drill holes in the tank
  4. The centre of the float valve should be 38mm from the top of the tank
  5. Do not install the tank close to a heat source such as a light or heater

Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.

As Standard

  • Polytank Lids
  • Float Valve Backing Plate

Options

  • Drip Tray
50 Gal Standard Closed Water Tank
50 Gal Standard Closed Water Tank Image

Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. Every closed water tank comes with lids fitted and a float valve backing plate for easy installation of the float valve and overflow fitting.

Each product is visually inspected for defects using a light source and again prior to loading.

Installation Instructions:

  1. Inspect all tanks before installation as damage may occur during transport
  2. Ensure that the tank is fully supported
  3. Use a hole saw to drill holes in the tank
  4. The centre of the float valve should be 38mm from the top of the tank
  5. Do not install the tank close to a heat source such as a light or heater

Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.

As Standard

  • Polytank Lids
  • Float Valve Backing Plate

Options

  • Drip Tray

 

5000 Litre AdBlue Tank
5000 Litre AdBlue Tank Image

Diameter Min: 2,190mm 86.22″
Diameter Max: 2,890mm 113.78″

5000 Litre Fuel Bank
5000 Litre Fuel Bank Image

Platinum Tanks range of bunded fuel stations feature a piusi fuel pump fitted with a 10 micron particulate filter and a 4m hose with automatic shut-off nozzle.

Both the inner tank and bund outer are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 2” fill point is fitted to the inner tank to enable easy filling of the inner tank. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

Platinum Tanks bunded fuel stations are manufactured to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • Piusi Pump
  • 4m Hose Pack with Auto Shut-Off Nozzle
  • Gauge Bung

 

Options

  • Alternative Hose Lengths
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention

 

Diameter Min: 2,190mm 86.22″
Diameter Max: 2,890mm 113.78″

5000 Litre Vertical Oil Tank
5000 Litre Vertical Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

All single skin oil storage tanks are manufactured to European Standard EN13343 and the manufacturing process adheres to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention

 

Diameter: 1,960mm 77.17″

60/40 Water Tank
60/40 Water Tank Image

Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.

Each product is visually inspected for defects using a light source and again prior to loading.

Installation Instructions:

  1. Inspect all tanks before installation as damage may occur during transport
  2. Ensure that the tank is fully supported
  3. Use a hole saw to drill holes in the tank
  4. The centre of the float valve should be 38mm from the top of the tank
  5. Do not install the tank close to a heat source such as a light or heater

Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.

 

Options

  • Lid
  • Drip Tray
600kg Coal Bunker
600kg Coal Bunker Image

Platinum Tanks range of bunkers offer customers a sturdy solutions for all their solid fuel and domestic storage needs. Available in black and green, all bunkers are manufactured from UV stabilised medium density polyethylene to protect the product from UV degradation. The manufacturing process adheres to the ISO 9001:2015 quality standard.

Features

  • Available in Black and Green.
  • These bunkers are designed for strength.
  • Indoor and outdoor use.
  • They have a top and bottom opening for easy access.
  • They are manufactured from UV resistant medium density polyethylene.
  • No maintenance required as they will not rot or rust.

Length:

Width:

Height:

Capacity:

600kg Grit Bin
600kg Grit Bin Image

The Platinum Tanks grit bin range offers customers storage solutions for sand and salt.

  • Available in highly visible colours e.g. Yellow
  • These bunkers are designed for strength.
  • Indoor and outdoor use.
  • They have a top and bottom opening for easy access.
  • They are manufactured from UV resistant medium density polyethylene.
  • No maintenance required as they will not rot or rust.
650 Litre Rectangular Oil Tank
650 Litre Rectangular Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

All single skin oil storage tanks are manufactured to European Standard EN13343 and the manufacturing process adheres to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention

Associated Documents

 

70 Gal Coffin Water Tank
70 Gal Coffin Water Tank Image

Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. Every closed water tank comes with lids fitted and a float valve backing plate for easy installation of the float valve and overflow fitting.

Each product is visually inspected for defects using a light source and again prior to loading.

Installation Instructions:

  1. Inspect all tanks before installation as damage may occur during transport
  2. Ensure that the tank is fully supported
  3. Use a hole saw to drill holes in the tank
  4. The centre of the float valve should be 38mm from the top of the tank
  5. Do not install the tank close to a heat source such as a light or heater

Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.

As Standard

  • Polytank Lids
  • Float Valve Backing Plate

Options

  • Drip Tray
80/60 Water Tank
80/60 Water Tank Image

Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.

Each product is visually inspected for defects using a light source and again prior to loading.

Installation Instructions:

  1. Inspect all tanks before installation as damage may occur during transport
  2. Ensure that the tank is fully supported
  3. Use a hole saw to drill holes in the tank
  4. The centre of the float valve should be 38mm from the top of the tank
  5. Do not install the tank close to a heat source such as a light or heater

Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.

 

Options

  • Lid
  • Drip Tray
90 Gallon Livestock Drinker
90 Gallon Livestock Drinker Image
  • Manufactured from medium/high density polyethylene.
  • Robust construction by design.
  • UV stabilised and suitable for all weather conditions.
  • All Platunum Drinkers come complete with 1/2 inch high pressure ball valves as standard. The design of the ball housing helps ensure the animals cannot damage the ball valve. They can also be fitted with larger ball valves on request.
  • Drinkers are maintenance free.
  • The livestock drinkers are very durable and lightweight thus making moving from pasture to pasture easy.
  • 410 Litres / 90 Gallons.
  • All drinkers need to be handled with care.

 

950 Litre Rectangular Oil Tank
950 Litre Rectangular Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

All single skin oil storage tanks are manufactured to European Standard EN13343 and the manufacturing process adheres to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention
Bunded 1000 Litre Rectangular Oil Tank
Bunded 1000 Litre Rectangular Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

The single skin inner tanks are manufactured to European Standard EN13343. Note: Currently there is no European Standard for bund outers, the standard is in progress at the moment and when it becomes law, all Platinum Bund outers will be tested to this standard. Both the inner tank and bund outer are manufactured to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

 

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention

 

Bunded 1250 Litre Rectangular Oil Tank
Bunded 1250 Litre Rectangular Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

The single skin inner tanks are manufactured to European Standard EN13343. Note: Currently there is no European Standard for bund outers, the standard is in progress at the moment and when it becomes law, all Platinum Bund outers will be tested to this standard. Both the inner tank and bund outer are manufactured to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

 

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention
Bunded 1360 Horizontal Oil Tank
Bunded 1360 Horizontal Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

The single skin inner tanks are manufactured to European Standard EN13343. Note: Currently there is no European Standard for bund outers, the standard is in progress at the moment and when it becomes law, all Platinum Bund outers will be tested to this standard. Both the inner tank and bund outer are manufactured to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

 

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention
Bunded 1360 Litre Vertical Oil Tank
Bunded 1360 Litre Vertical Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

The single skin inner tanks are manufactured to European Standard EN13343. Note: Currently there is no European Standard for bund outers, the standard is in progress at the moment and when it becomes law, all Platinum Bund outers will be tested to this standard. Both the inner tank and bund outer are manufactured to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

 

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention

 

Diameter: 1,440mm 55.69″

Bunded 2000 Litre Horizontal Oil Tank
Bunded 2000 Litre Horizontal Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

The single skin inner tanks are manufactured to European Standard EN13343. Note: Currently there is no European Standard for bund outers, the standard is in progress at the moment and when it becomes law, all Platinum Bund outers will be tested to this standard. Both the inner tank and bund outer are manufactured to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

 

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention
Bunded 2500 Litre Horizontal Oil Tank
Bunded 2500 Litre Horizontal Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

The single skin inner tanks are manufactured to European Standard EN13343. Note: Currently there is no European Standard for bund outers, the standard is in progress at the moment and when it becomes law, all Platinum Bund outers will be tested to this standard. Both the inner tank and bund outer are manufactured to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

 

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention

 

Bunded 2500 Litre Vertical Oil Tank
Bunded 2500 Litre Vertical Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

The single skin inner tanks are manufactured to European Standard EN13343. Note: Currently there is no European Standard for bund outers, the standard is in progress at the moment and when it becomes law, all Platinum Bund outers will be tested to this standard. Both the inner tank and bund outer are manufactured to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

 

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention

 

Diameter: 1,900mm 74.80″

Bunded 5000 Litre Vertical Oil Tank
Bunded 5000 Litre Vertical Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

The single skin inner tanks are manufactured to European Standard EN13343. Note: Currently there is no European Standard for bund outers, the standard is in progress at the moment and when it becomes law, all Platinum Bund outers will be tested to this standard. Both the inner tank and bund outer are manufactured to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

 

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention

 

Diameter: 2,190mm 86.22″

Bunded 650 Litre Rectangular Oil Tank
Bunded 650 Litre Rectangular Oil Tank Image

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

The single skin inner tanks are manufactured to European Standard EN13343. Note: Currently there is no European Standard for bund outers, the standard is in progress at the moment and when it becomes law, all Platinum Bund outers will be tested to this standard. Both the inner tank and bund outer are manufactured to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 1” BSP Outlet
  • Gauge Bung

 

Options

  • Tank Pack (1”/0.5” reducer, fuel filter with shut off valve)
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention
Closet Tank
Closet Tank Image

Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.

Each product is visually inspected for defects using a light source and again prior to loading.

Installation Instructions:

  1. Inspect all tanks before installation as damage may occur during transport
  2. Ensure that the tank is fully supported
  3. Use a hole saw to drill holes in the tank
  4. The centre of the float valve should be 38mm from the top of the tank
  5. Do not install the tank close to a heat source such as a light or heater

Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.

 

Options

  • Lid
  • Drip Tray
Extra Large Drip Tray
Forecourt Bunker
Forecourt Bunker Image

The Platinum Forecourt Bunker provides a secure lockable display unit for shops and forecourts. It is also ideal for households as a storage container.

  • Available in Blue, Black, Green & Red.
  • They are rot and rust proof.
  • The Forecourt Bunker is manufactured from a UV stabilized medium grade polyethylene.
  • The Forecourt Bunker is suitable for storing products such as coal, briquettes and wood. Typical capacity of bunker is 30 x 25kg bags.
  • The lid of the Forecourt Bunker is fully retractable for displaying products.

 

Gravity Feed Fuel Tank
Gravity Feed Fuel Tank Image

Platinum Tanks range of oil storage tanks are suitable for use as gravity feed fuel tanks. The tanks can be fitted with a hose pack and auto cut off nozzle.

All fuel storage tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is fitted to every tank for ease of installation. Each fuel tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

All products are manufactured to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.

As Standard

  • 4m Hose Pack with Auto Shut-Off Nozzle
  • Gauge Bung

 

Options

  • Alternative Hose Lengths
  • Ultrasonic Content Gauge
  • Sight Gauge
  • Clock Gauge
  • Top outlet with Anti-Syphon
  • 2” Fill Point
  • 2” Overspill Prevention
Large Drip Tray
Medium Drip Tray
Road Barrier
Slim 60 Water Tank
Slim 60 Water Tank Image

Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.

Each product is visually inspected for defects using a light source and again prior to loading.

Installation Instructions:

  1. Inspect all tanks before installation as damage may occur during transport
  2. Ensure that the tank is fully supported
  3. Use a hole saw to drill holes in the tank
  4. The centre of the float valve should be 38mm from the top of the tank
  5. Do not install the tank close to a heat source such as a light or heater

Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.

 

Options

  • Lid
  • Drip Tray
Small Drip Tray
W50 Water Tank
W50 Water Tank Image

Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.

Each product is visually inspected for defects using a light source and again prior to loading.

Installation Instructions:

  1. Inspect all tanks before installation as damage may occur during transport
  2. Ensure that the tank is fully supported
  3. Use a hole saw to drill holes in the tank
  4. The centre of the float valve should be 38mm from the top of the tank
  5. Do not install the tank close to a heat source such as a light or heater

Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.

 

Options

  • Lid
  • Drip Tray
WM60 Square Water Tank
WM60 Square Water Tank Image

Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.

Each product is visually inspected for defects using a light source and again prior to loading.

Installation Instructions:

  1. Inspect all tanks before installation as damage may occur during transport
  2. Ensure that the tank is fully supported
  3. Use a hole saw to drill holes in the tank
  4. The centre of the float valve should be 38mm from the top of the tank
  5. Do not install the tank close to a heat source such as a light or heater

Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.

 

Options

  • Lid
  • Drip Tray
10/4 Feed and Expansion Tank Image
10/4 Feed and Expansion Tank
Length: Width: Height: Capacity:
Length:450mm (17.7″)
Width:315mm (12.4″)
Height:300mm (11.8″)
100 Gal Coffin Water Tank Image
100 Gal Coffin Water Tank
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. Every closed water tank comes with lids fitted and a float... Read More
Length:1,670mm (64″)
Width:690mm (26″)
Height:580mm (23″)
100/70 Water Tank Image
100/70 Water Tank
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storag... Read More
Length:1,790mm (70.75″)
Width:550mm (21.5″)
Height:550mm (21.5″)
1000 Litre Rectangular Oil Tank Image
1000 Litre Rectangular Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Length:1,780mm (70″)
Width:530mm (20.8″)
Height:1,450mm (51″)
1150 Litre Potable Water Tank Image
1150 Litre Potable Water Tank
Platinum Tanks range of large capacity potable water tanks are suitable for domestic, commercial and agricultural use. The entire range is manufactured from UV stabilised linear low density polyethylene to protect the product from UV deg... Read More
Length:1,770mm (70″)
Width:660mm (26″)
Height:1,270mm (50″)
1150 Litre Rectangular Oil Tank Image
1150 Litre Rectangular Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Length:1,770mm (70″)
Width:660mm (26″)
Height:1,270mm (50″)
12 Gallon Livestock Drinker Image
12 Gallon Livestock Drinker
Manufactured from medium/high density polyethylene. Robust construction by design. UV stabilised and suitable for all weather conditions. All Platunum Drinkers come complete with 1/2 inch high pressure ba... Read More
Length:680mm
Width:445mm
Height:355mm
1230 Litre Low Profile Oil Tank Image
1230 Litre Low Profile Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Length:1,830mm (72″)
Width:1,060mm (41.7″)
Height:890mm (35″)
1250 Litre Rectangular Oil Tank Image
1250 Litre Rectangular Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Length:1,935mm (76.18″)
Width:680mm (26.77″)
Height:1,450mm (57.09″)
1360 Litre AdBlue Tank Image
1360 Litre AdBlue Tank
Length:1,870mm (73.60″)
Width:1,300mm (51.18″)
Height:1,595mm (62.80″)
1360 Litre Fuel Bank Image
1360 Litre Fuel Bank
Platinum Tanks range of bunded fuel stations feature a piusi fuel pump fitted with a 10 micron particulate filter and a 4m hose with automatic shut-off nozzle. Both the inner tank and bund outer are manufactured from UV stabilised... Read More
Length:1,870mm (73.60″)
Width:1,300mm (51.18″)
Height:1,595mm (62.80″)
1360 Litre Horizontal Oil Tank Image
1360 Litre Horizontal Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Length:1,620mm (66″)
Width:1,100mm (44″)
Height:1,180mm (47″)
1360 Litre Vertical Oil Tank Image
1360 Litre Vertical Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Height:1,450mm (57.09″)
1360 Litre Vertical Waste Oil Well Image
1360 Litre Vertical Waste Oil Well
Height:1,450mm 57.09″
Diameter:1,200mm 47.24″
150/100 Water Tank Image
150/100 Water Tank
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storag... Read More
Length:1,440mm (56.73″)
Width:790mm (31.9″)
Height:660mm (26.0″)
150kg Coal Bunker Image
150kg Coal Bunker
Platinum Tanks range of bunkers offer customers a sturdy solutions for all their solid fuel and domestic storage needs. Available in black and green, all bunkers are manufactured from UV stabilised medium density polyethylene to protect ... Read More
Length:860mm
Width:610mm
Height:780mm
150kg Grit Bin Image
150kg Grit Bin
The Platinum Tanks grit bin range offers customers storage solutions for sand and salt. Available in highly visible colours e.g. Yellow These bunkers are designed for strength. Indoor and outdoor use. ... Read More
Length:860mm
Width:610mm
Height:780mm
2000 Litre Horizontal Oil Tank Image
2000 Litre Horizontal Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Length:1,950mm (78″)
Width:1,200mm (48″)
Height:1,270m (50″)
230 Gallon Craneable Mortar Tub Image
230 Gallon Craneable Mortar Tub
Handles: 2 Handle Craneable
230 Gallon Teleporter Mortar Tub Image
230 Gallon Teleporter Mortar Tub
Handles: 4 Handle Teleporter Capacity:
25 Gal Coffin Water Tank Image
25 Gal Coffin Water Tank
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. Every closed water tank comes with lids fitted and a float... Read More
Length:1,390mm (55″)
Width:500mm (20″)
Height:310mm (12″)
25 Gal Standard Closed Water Tank Image
25 Gal Standard Closed Water Tank
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. Every closed water tank comes with lids fitted and a float... Read More
Length:690mm (27″)
Width:515mm (20″)
Height:520mm (20″)
250 Gallon Livestock Drinker Image
250 Gallon Livestock Drinker
Manufactured from medium/high density polyethylene. Robust construction by design. UV stabilised and suitable for all weather conditions. All Platunum Drinkers come complete with 1/2 inch high pressure ba... Read More
Height:865mm
Diameter:1,725mm
2500 Litre AdBlue Tank Image
2500 Litre AdBlue Tank
Length:2,430mm (95.67″)
Width:1,480mm (58.27″)
Height:1,830mm (72.05″)
2500 Litre Fuel Bank Image
2500 Litre Fuel Bank
Platinum Tanks range of bunded fuel stations feature a piusi fuel pump fitted with a 10 micron particulate filter and a 4m hose with automatic shut-off nozzle. Both the inner tank and bund outer are manufactured from UV stabilised... Read More
Length:2,430mm (95.67″)
Width:1,480mm (58.27″)
Height:1,830mm (72.05″)
2500 Litre Horizontal Oil Tank Image
2500 Litre Horizontal Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Length:2,150mm (85″)
Width:1,300mm (54″)
Height:1,380mm (55″)
2500 Litre Vertical Oil Tank Image
2500 Litre Vertical Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Height:1,450mm (57.09″)
30/20 Water Tank Image
30/20 Water Tank
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storag... Read More
Length:780mm (30.7″)
Width:480mm (18.9″)
Height:470mm (18.5″)
300kg Coal Bunker Image
300kg Coal Bunker
Platinum Tanks range of bunkers offer customers a sturdy solutions for all their solid fuel and domestic storage needs. Available in black and green, all bunkers are manufactured from UV stabilised medium density polyethylene to protect ... Read More
Length:960mm
Width:890mm
Height:980mm
300kg Grit Bin Image
300kg Grit Bin
The Platinum Tanks grit bin range offers customers storage solutions for sand and salt. Available in highly visible colours e.g. Yellow These bunkers are designed for strength. Indoor and outdoor use. ... Read More
Length:960mm
Width:890mm
Height:980mm
40 Gallon Livestock Drinker Image
40 Gallon Livestock Drinker
Manufactured from medium/high density polyethylene. Robust construction by design. UV stabilised and suitable for all weather conditions. All Platunum Drinkers come complete with 1/2 inch high pressure ba... Read More
Length:1,190mm
Width:480mm
Height:420mm
42 Gal Standard Closed Water Tank Image
42 Gal Standard Closed Water Tank
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. Every closed water tank comes with lids fitted and a float... Read More
Length:1,185mm (46″)
Width:503mm (19″)
Height:503mm (19″)
45/30 Water Tank Image
45/30 Water Tank
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storag... Read More
Length:1,160mm (45.7″)
Width:460mm (18.1″)
Height:460mm (18.1″)
50 Gal Coffin Water Tank Image
50 Gal Coffin Water Tank
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. Every closed water tank comes with lids fitted and a float... Read More
Length:1,640mm 64″
Width:450mm 18″
Height:485mm 19″
50 Gal Standard Closed Water Tank Image
50 Gal Standard Closed Water Tank
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. Every closed water tank comes with lids fitted and a float... Read More
Length:1,185mm (46″)
Width:503mm (19″)
Height:503mm (19″)
5000 Litre AdBlue Tank Image
5000 Litre AdBlue Tank
Diameter Min: 2,190mm 86.22″ Diameter Max: 2,890mm 113.78″
Height:2,400mm (94.49″)
5000 Litre Fuel Bank Image
5000 Litre Fuel Bank
Platinum Tanks range of bunded fuel stations feature a piusi fuel pump fitted with a 10 micron particulate filter and a 4m hose with automatic shut-off nozzle. Both the inner tank and bund outer are manufactured from UV stabilised... Read More
Height:2,400mm (94.49″)
5000 Litre Vertical Oil Tank Image
5000 Litre Vertical Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Height:2,120mm (83.46″)
60/40 Water Tank Image
60/40 Water Tank
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storag... Read More
Length:1,260mm (49.6″)
Width:660mm (26.0″)
Height:530mm (20.9″)
600kg Coal Bunker Image
600kg Coal Bunker
Platinum Tanks range of bunkers offer customers a sturdy solutions for all their solid fuel and domestic storage needs. Available in black and green, all bunkers are manufactured from UV stabilised medium density polyethylene to protect ... Read More
Length:1,200mm
Width:980mm
Height:1,150mm
600kg Grit Bin Image
600kg Grit Bin
The Platinum Tanks grit bin range offers customers storage solutions for sand and salt. Available in highly visible colours e.g. Yellow These bunkers are designed for strength. Indoor and outdoor use. ... Read More
Length:1,200mm
Width:980mm
Height:1,150mm
650 Litre Rectangular Oil Tank Image
650 Litre Rectangular Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Length:1,450mm (57″)
Width:540mm (21.25″)
Height:1,210mm (47.6″)
70 Gal Coffin Water Tank Image
70 Gal Coffin Water Tank
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. Every closed water tank comes with lids fitted and a float... Read More
Length:1,650mm (64″)
Width:610mm (24″)
Height:475mm (19″)
80/60 Water Tank Image
80/60 Water Tank
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storag... Read More
Length:1,575mm (62.0″)
Width:525mm (20.7″)
Height:580mm (22.8″)
90 Gallon Livestock Drinker Image
90 Gallon Livestock Drinker
Manufactured from medium/high density polyethylene. Robust construction by design. UV stabilised and suitable for all weather conditions. All Platunum Drinkers come complete with 1/2 inch high pressure ba... Read More
Length:1,405mm
Width:610mm
Height:625mm
950 Litre Rectangular Oil Tank Image
950 Litre Rectangular Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Length:1,440mm (56.75″)
Width:660mm (26″)
Height:1,220mm (48″)
Bunded 1000 Litre Rectangular Oil Tank Image
Bunded 1000 Litre Rectangular Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Length:1,890mm (74.4″)
Width:690mm (27.17”)
Height:1,530mm (60″)
Bunded 1250 Litre Rectangular Oil Tank Image
Bunded 1250 Litre Rectangular Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Length:2,250mm (88.58″)
Width:910mm (35.83″)
Height:1,610mm (63.39″)
Bunded 1360 Horizontal Oil Tank Image
Bunded 1360 Horizontal Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Length:1,870mm (73.62″)
Width:1,300mm (51.18″)
Height:1,350mm (53.15″)
Bunded 1360 Litre Vertical Oil Tank Image
Bunded 1360 Litre Vertical Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Height:1,630mm (64.17″)
Bunded 2000 Litre Horizontal Oil Tank Image
Bunded 2000 Litre Horizontal Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Length:2,230mm (87.80″)
Width:1,400mm (55.10″)
Height:1,420mm (55.90″)
Bunded 2500 Litre Horizontal Oil Tank Image
Bunded 2500 Litre Horizontal Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Length:2,430mm (95.67″)
Width:1,480mm (58.27″)
Height:1,575mm (62.01″)
Bunded 2500 Litre Vertical Oil Tank Image
Bunded 2500 Litre Vertical Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Height:1,625mm (63.98″)
Bunded 5000 Litre Vertical Oil Tank Image
Bunded 5000 Litre Vertical Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Height:2,400mm (94.49″)
Bunded 650 Litre Rectangular Oil Tank Image
Bunded 650 Litre Rectangular Oil Tank
Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ... Read More
Length:1,550mm (65″)
Width:680mm (26.7″)
Height:1,600mm (63″)
Closet Tank Image
Closet Tank
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storag... Read More
Length:600mm (23.7″)
Width:600mm (23.7″)
Height:1,090mm (43″)
Forecourt Bunker Image
Forecourt Bunker
The Platinum Forecourt Bunker provides a secure lockable display unit for shops and forecourts. It is also ideal for households as a storage container. Available in Blue, Black, Green & Red. They are rot and rus... Read More
Length:1910mm
Width:1060mm
Height:1040mm
Gravity Feed Fuel Tank Image
Gravity Feed Fuel Tank
Platinum Tanks range of oil storage tanks are suitable for use as gravity feed fuel tanks. The tanks can be fitted with a hose pack and auto cut off nozzle. All fuel storage tanks are manufactured from UV stabilised linear low den... Read More
Road Barrier Image
Road Barrier
Length:2,000mm
Width:800mm
Slim 60 Water Tank Image
Slim 60 Water Tank
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storag... Read More
Length:1,336mm (52.6″)
Width:470mm (18.5″)
Height:455mm (17.9″)
W50 Water Tank Image
W50 Water Tank
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storag... Read More
Length:1,100mm (43.3″)
Width:570mm (22.4″)
Height:530mm (20.9″)
WM60 Square Water Tank Image
WM60 Square Water Tank
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storag... Read More
Length:870mm (34.3″)
Width:595mm (23.5″)
Height:610mm (24.0″)