Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.
Each product is visually inspected for defects using a light source and again prior to loading.
Installation Instructions:
- Inspect all tanks before installation as damage may occur during transport
- Ensure that the tank is fully supported
- Use a hole saw to drill holes in the tank
- The centre of the float valve should be 38mm from the top of the tank
- Do not install the tank close to a heat source such as a light or heater
Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.
Options
- Lid
- Drip Tray
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.
Each product is visually inspected for defects using a light source and again prior to loading.
Installation Instructions:
- Inspect all tanks before installation as damage may occur during transport
- Ensure that the tank is fully supported
- Use a hole saw to drill holes in the tank
- The centre of the float valve should be 38mm from the top of the tank
- Do not install the tank close to a heat source such as a light or heater
Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.
Options
- Lid
- Drip Tray
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.
Each product is visually inspected for defects using a light source and again prior to loading.
Installation Instructions:
- Inspect all tanks before installation as damage may occur during transport
- Ensure that the tank is fully supported
- Use a hole saw to drill holes in the tank
- The centre of the float valve should be 38mm from the top of the tank
- Do not install the tank close to a heat source such as a light or heater
Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.
Options
- Lid
- Drip Tray
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.
Each product is visually inspected for defects using a light source and again prior to loading.
Installation Instructions:
- Inspect all tanks before installation as damage may occur during transport
- Ensure that the tank is fully supported
- Use a hole saw to drill holes in the tank
- The centre of the float valve should be 38mm from the top of the tank
- Do not install the tank close to a heat source such as a light or heater
Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.
Options
- Lid
- Drip Tray
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.
Each product is visually inspected for defects using a light source and again prior to loading.
Installation Instructions:
- Inspect all tanks before installation as damage may occur during transport
- Ensure that the tank is fully supported
- Use a hole saw to drill holes in the tank
- The centre of the float valve should be 38mm from the top of the tank
- Do not install the tank close to a heat source such as a light or heater
Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.
Options
- Lid
- Drip Tray
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.
Each product is visually inspected for defects using a light source and again prior to loading.
Installation Instructions:
- Inspect all tanks before installation as damage may occur during transport
- Ensure that the tank is fully supported
- Use a hole saw to drill holes in the tank
- The centre of the float valve should be 38mm from the top of the tank
- Do not install the tank close to a heat source such as a light or heater
Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.
Options
- Lid
- Drip Tray
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.
Each product is visually inspected for defects using a light source and again prior to loading.
Installation Instructions:
- Inspect all tanks before installation as damage may occur during transport
- Ensure that the tank is fully supported
- Use a hole saw to drill holes in the tank
- The centre of the float valve should be 38mm from the top of the tank
- Do not install the tank close to a heat source such as a light or heater
Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.
Options
- Lid
- Drip Tray
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.
Each product is visually inspected for defects using a light source and again prior to loading.
Installation Instructions:
- Inspect all tanks before installation as damage may occur during transport
- Ensure that the tank is fully supported
- Use a hole saw to drill holes in the tank
- The centre of the float valve should be 38mm from the top of the tank
- Do not install the tank close to a heat source such as a light or heater
Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.
Options
- Lid
- Drip Tray
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.
Each product is visually inspected for defects using a light source and again prior to loading.
Installation Instructions:
- Inspect all tanks before installation as damage may occur during transport
- Ensure that the tank is fully supported
- Use a hole saw to drill holes in the tank
- The centre of the float valve should be 38mm from the top of the tank
- Do not install the tank close to a heat source such as a light or heater
Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.
Options
- Lid
- Drip Tray
Platinum Tanks range of cold water attic storage tanks are manufactured to European quality standards and the manufacturing process adheres to the ISO 9001:2015 quality standard. A lid can be supplied to suit each open attic water storage tank.
Each product is visually inspected for defects using a light source and again prior to loading.
Installation Instructions:
- Inspect all tanks before installation as damage may occur during transport
- Ensure that the tank is fully supported
- Use a hole saw to drill holes in the tank
- The centre of the float valve should be 38mm from the top of the tank
- Do not install the tank close to a heat source such as a light or heater
Warning: To ensure uniform loading of the product, water storage tanks must be installed on a flat non-deformable base which extends beyond the product on all sides. Failure to meet this requirement will void all warranties on the product.
Options
- Lid
- Drip Tray
Width:315mm (12.4″)
Height:300mm (11.8″)
Width:480mm (18.9″)
Height:470mm (18.5″)
Width:460mm (18.1″)
Height:460mm (18.1″)
Width:470mm (18.5″)
Height:455mm (17.9″)
Width:595mm (23.5″)
Height:610mm (24.0″)
Width:660mm (26.0″)
Height:530mm (20.9″)
Width:570mm (22.4″)
Height:530mm (20.9″)
Width:525mm (20.7″)
Height:580mm (22.8″)
Width:600mm (23.7″)
Height:1,090mm (43″)
Width:550mm (21.5″)
Height:550mm (21.5″)
Width:790mm (31.9″)
Height:660mm (26.0″)